DECISION MADE: WE SILICONE IT OURSELVES. NO MORE OPTIONS - MAKE IT HAPPEN.
Runner (Laura, front desk) picks the crew up at 10:30 PM, crew in at 11 PM -
install LED + solder, Curt & Ryan follow with the BioSeal. ~6 pieces get hard
coated tonight; paint team (3 AM call) primes + base coats them tomorrow, then that LED
goes in. Kenny lands on the 6 AM flight - control/programming + coordination, and
makes the "get up here" call when the hard-coat pieces are ready so the crew can sleep.
More silicone lands tomorrow: 10 tubes by 8 AM, 10 more by 11 AM.
Last update: Mon 7/13 - night: EXECUTING
SYNC: loading…
MISSION STATUS
CURRENT OBJECTIVE: LOCATE PRODUCT
0 OF 5 STEPS COMPLETE
1✓
LOCATE
PENDING
2✓
SHIP TO STL
PENDING
3✓
INSTALL PLAN
PENDING
4✓
CREW UP
PENDING
🏆✓
MAKE IT HAPPEN
PENDING
THE PLAN - 5 STEPS
Tap a status pill to cycle: PENDING → IN PROGRESS → DONE → BLOCKED. Everyone sees the change.
1
LOCATE PRODUCT OR SOLUTION
DONE: siliconing the delivered strip ourselves with BioSeal clear (neutral cure, stays clear, color match confirmed - IP20 is the identical strip, factory IP65 is just a clear coat).
2
GET IT TO ST. LOUIS - SCHEDULED & PLANNED
DONE: product is at Gateway. Silicone resupply lands tomorrow: 10 tubes by 8 AM + 10 more by 11 AM.
3
INSTALL PLAN - WHEN IT GOES IN
DONE: crew in 11 PM tonight (runner pickup 10:30). LED + solder, Curt & Ryan silicone behind. ~6 hard-coat pieces get their LED tomorrow after primer + base coat (paint call 3 AM).
4
EXTRA PEOPLE IF NEEDED
DONE: crew set. Kenny lands on the 6 AM flight - control/programming + daytime coordination so the night crew can sleep.
5
MAKE IT HAPPEN
WE ARE HERE. Install, solder, silicone, hard-coat pieces tomorrow, risers lit + waterproof + show-ready. Thin skin on the strip face, heavy beads at ends/joints/wire exits. 30 min to rain-ready, 24 h full cure.
ITEMS WE NEED
LOG - NEWEST FIRST
Mon 7/13 nightDECISION: we silicone it ourselves with BioSeal - all other options closed. Steps 1-4 complete, MAKE IT HAPPEN is live. More silicone tomorrow: 10 tubes by 8 AM + 10 by 11 AM.
Mon 7/13 3pmPLAN LOCKED (from crew call): runner pickup 10:30 PM, crew in at 11 PM - install LED + solder, Curt & Ryan silicone behind them. ~6 pieces get hard coat tonight; paint team (3 AM call) primes + base coats them tomorrow, then that LED goes in. Kenny on the 6 AM flight - runs control + coordination tomorrow so the night crew can sleep. He gives the "get up here" call when hard-coat pieces are ready.
Mon 7/13 1pmBioSeal clear silicone ORDERED on Amazon (10 + 2 tubes) for the coat plan. GE Advanced Silicone 2 from Home Depot Chesterfield stays the local backup if we need more same-day.
Mon 7/13 middaySleeve option (Plan C) CHECKED AND DEAD: stock not adequate, no overnight. Supplier inventory check still pending - STANDING BY. Conformal coat (Plan B) is the fallback.
Mon 7/13RESEARCH: IP20 twin 24VCS3596RGB confirmed IDENTICAL strip to the IP65 (same chips, density, 6500K white) - if that is what arrived, color matches and field-coating is safe. First move: verify the SKU on the delivered reel labels + bench-test side by side with a known IP65 piece, whites at full.
Mon 7/13LEAD: Glowback retail store lists the IP65 reel at $173.90 "Usually Ships Within 24 Hours" (IP20 shows OUT OF STOCK retail). Call to confirm real qty - we need 24.
Mon 7/13 AMSupplier checking Miami inventory for 24 reels of correct waterproof product. STANDING BY.